Critical Power Supply Solutions in Jordan

Reliable UPS systems, industrial generators, battery backup systems, DC systems, and power conditioning solutions for facilities that cannot afford interruption.

CET helps businesses, institutions, and critical infrastructure protect sensitive equipment, reduce downtime risk, and maintain operational continuity through properly selected, installed, commissioned, and supported power systems.

Online double-conversion UPS cabinet protecting a critical load

Why Critical Power Matters

Power problems are not limited to full outages. Facilities also lose equipment and uptime to voltage dips, surges, frequency instability, harmonic distortion, overheating, battery failure and unstable distribution. For a bank or data room, that reaches servers and security systems. For a lab, it reaches sensitive testing equipment. For a factory, it interrupts production or damages machinery. CET designs around the actual risks of each facility, not a generic spec.

Engineering First

Sized right from day one.

01

Load Audit

Real kW, inrush and power factor, measured on site.

02

Sizing Study

Headroom, runtime and N+1 worked out for your load.

03

Selection

The right topology and brand for the load and budget.

04

Installation

Installed, tested, commissioned and handed over.

05

Support

Preventive maintenance and a 2-year warranty.

THE POWER CHAIN

0 ms felt by the load

Double-conversion UPS carries the load continuously; the battery rides the gap until the generator picks up. The load never sees the break.

 
UPS SYSTEMS

Uninterruptible Power Supply Solutions

At Critical Energy Technologies, we understand that power continuity is the backbone of daily operations. Our Uninterruptible Power Supply (UPS) solutions are designed to protect critical infrastructure from outages, voltage fluctuations, and electrical disturbances.

Whether you are securing sensitive medical equipment, a high-density data center, a telecom room, a laboratory, a financial institution, or an industrial facility, CET helps select, supply, install, commission, and maintain UPS systems based on your load requirements, runtime needs, site conditions, and long-term support expectations.

Our Core UPS Brands

Riello UPS
Legrand
Salicru
APC
Kehua Tech

CET also supports and maintains selected systems from other major UPS brands when required, including APC, Schneider Electric, Eaton, and Vertiv. Support depends on model, spare parts availability, technical documentation, site conditions, and equipment assessment.

Online Double Conversion 1000KVA Legrand UPS SAVER
UPS Technology
0ms
Transfer time

Online double-conversion rebuilds power from scratch, AC to DC to AC, continuously. Your load never touches raw mains, and never feels the failure.

What CET installs

VFI — Online

0 ms transfer · pure sine wave at all times · full isolation from grid disturbances. The class rated for servers, labs and medical loads.

VI — Line-interactive

2 to 6 ms break on transfer · regulates voltage only. Fine for desktops, not for critical loads.

VFD — Offline

5 to 10 ms break · basic surge protection. The gap alone can reboot sensitive equipment.

Equipment Lifecycle

Built to last 15+ years.

A properly maintained three-phase UPS is a 15-year asset, not a 5-year appliance. We engineer for lifecycle: only three things ever need replacing.

Install & commissionSized, tested and handed over on load by CET engineers.
Year 5 — batteriesReplace the battery set. That’s the only scheduled change.
Year 7 — fans & capacitorsPreventive swap of cooling fans and capacitors. That’s all.
Year 15 — still on loadGenuine parts and factory service keep it running beyond 15 years.

Factory maintenance programs from Legrand · Riello · Kehua Tech · Salicru.

 
GENERATORS

Industrial Generator Solutions

At Critical Energy Technologies, we deliver industrial generator solutions designed to help facilities continue operating during prolonged grid failures, unstable utility supply, emergency conditions, and temporary power requirements.

Generators are an essential part of a complete critical power strategy. While UPS systems provide immediate backup and protect sensitive loads, generators support longer runtime and larger facility loads during extended outages.

Our Core Generator Brands

Generac
Pramac

CET also works with advanced generator control modules such as Deep Sea Electronics. CET can support, maintenance, or coordinate generator solutions involving other major brands when required, including Cummins, Caterpillar / CAT, SDMO / Kohler, AKSA, EMSA, and Rehlko.

Diesel Generator Solutions In Jordan
Generators: Built for Life

Our Pramac and Generac generator sets are engineered for continuous uptime loads. Serviced on schedule, they run for the life of your facility.

Battery Systems

Service life by type.

The right battery for the right application:

Nickel-Cadmium (NiCd)Harsh climates & switchgear
up to 25 years
OPzS floodedTelecom & utility DC
up to 20 years
Lithium-ion (Li-ion)High cycling & compact rooms
up to 15 years
VRLA / AGMUPS standard
up to 12 years

Service life varies with temperature and cycling. CET matches the design to your application: UPS runtime, telecom DC, switchgear tripping or solar cycling.

BATTERIES

Battery and DC Power Systems

Battery and DC systems are a critical part of UPS, telecom, industrial, control, and backup power infrastructure. The right battery system affects runtime, reliability, maintenance planning, and system performance.

Battery and DC Brands

Saft
Ultracell
EnerSys
CSB
Alcad

CET can also support or coordinate selected battery replacement and DC power requirements for other major brands when technically suitable.

CHARGER

Rectifiers and Battery Chargers

Rectifiers and battery chargers convert AC power into DC power for battery charging, telecom equipment, control systems, switchgear, industrial systems, and backup power applications.

Charger and Rectifier Brands

Salicru
Sigma
Chloride

CET can also support or coordinate selected battery replacement and DC power requirements for other major brands when technically suitable.

Power Quality

Clean power, not just present power.

Present is not the same as clean. We fix the shape of the wave, not just its supply.

Distorted supply
After CET
Rectifiers & chargersIndustrial DC for telecom, switchgear and control, sized to load and runtime.
Converters & regulatorsStatic and rotary conversion, automatic regulation against sags, surges and brownouts.
Harmonic filters & banksPower-factor correction and harmonic mitigation. Lower penalties, less heat.
REGULATOR

Voltage Regulators and Power Stabilization

Voltage fluctuations can damage equipment, reduce performance, create nuisance faults, and shorten the lifespan of sensitive electrical systems. Voltage regulators help stabilize incoming power and protect equipment from unstable voltage conditions.

Salicru

CET can also source or support other suitable voltage regulation systems depending on the site and technical requirements.

 
FILTER

Harmonic Filters and Capacitor Banks

Some facilities need more than backup power. They need stable, clean, and properly conditioned electrical power. Harmonic distortion, poor power factor, and power quality issues can create heat, increase losses, reduce equipment life, and affect system performance.

ABB
Legrand

CET can also support other suitable brands depending on the electrical study, project requirements, and equipment availability.

IPS

Isolated Power Supply

CET supplies and installs medical IPS systems built around an isolation transformer, continuous insulation monitoring and an alarm panel at the point of care. On a first fault the room stays powered and staff are alerted, so care continues while the fault is traced according to the IEC 60364-7-710.

Operating rooms, surgery, ICUs and dialysis rooms cannot lose power on a single earth fault. An isolated power supply keeps the room live and raises an alarm instead of tripping.

  • Stays live on first fault: alarm, not an outage.
  • Medical isolation transformer:: built for surgery rooms & ICUs.
  • Continuous insulation monitoring, with fault location.

– Alarm at the point of care: status visible in the room.

CONVERTER

Frequency Converters

Frequency converters are used when equipment requires a different frequency than the available electrical supply. They may be required for specialized industrial equipment, imported machinery, aviation, marine, testing, defense, or technical applications.

Salicru
Riello UPS

CET can also source other frequency converter solutions depending on project requirements.

Answers

Questions buyers ask us.

Sizing, brands, service and warranty. If your question is not here, ask and we will answer it directly.

Ask a question →
How do you size a UPS for my facility?+

We start from your measured load, not a nameplate. Our engineers record real kW and kVA, inrush and power factor, then add headroom for growth and set the runtime you need against the battery autonomy. Every quotation begins with this sizing study, and it is free.

What UPS and generator brands does CET supply?+

For UPS we carry Riello, Salicru, Kehua and Legrand. Generators are Pramac. Batteries include VRLA, nickel-cadmium and lithium from Salicru, Saft and others. We are brand-agnostic in sizing: we recommend the right topology and make for your load and budget, not whatever we hold in stock.

Do you service and maintain equipment you did not supply?+

Yes. We maintain UPS systems, generators and battery plant from most major manufacturers, not only what we sold. Maintenance plans include preventive visits, battery impedance and discharge testing, and priority response for contract clients.

How long does delivery and installation take?+

Standard single-phase and small three-phase UPS typically ship in two to three weeks. Larger three-phase systems, generators and engineered projects depend on configuration and are confirmed at quotation. Installation and commissioning are scheduled around your site access and downtime windows.

Do you offer rental or temporary power?+

Yes. We supply temporary generators, UPS, load banks and cooling for emergencies, events, migrations and testing. Rental is quoted to the duration and load rather than sold from a fixed price list.

What warranty comes with CET equipment?+

Two full years as standard on every product we sell, covering parts, labour and technical support from the day we commission. The market norm is one year, often parts only. Our two years is standard, not an upgrade.

Can you support 24/7 critical sites?+

Yes. Clients on a professional maintenance contract have 24/7 emergency response. For sites that cannot drop the load at all, we design N+1 parallel redundancy so a single failure never reaches the equipment.

Which industries do you work with in Jordan and the region?+

Banks, hospitals and clinics, data centres, telecom, government and industrial plant. Anywhere a power interruption reaches servers, life-safety systems, sensitive test equipment or production, the requirement is the same: clean, continuous power, engineered to the site.

CONTACT INFORMATION

Let’s talk about building something dependable